Rebit Support Forum » Product Questions

How do I add a drive to the backup?

(4 posts)

  1. Admin
    Key Master

    By default, Rebit backs up any hard disk drives considered internal hard drives by Windows. These include hard drives connected directly to the motherboard, as well as any Firewire or eSATA hard drives.

    Additional hard drives, such as external USB hard drives, may be added to items backed up as follows:

    1. Right-click the small Rebit icon in the lower right corner and select “More” -> “Select drives to back up”
    2. Click to check the box(es) beside the drive(s) you wish to add
    3. Click “Ok”

    This assumes there is capacity available on the Rebit drive to back up the additional drives.

    Posted 2 years ago #

  2. cindystuart
    Member

    1.Right-click the small Rebit icon in the lower right corner and select “More” -> “Select drives to back up”

    My Problem!:

    Upon right clicking the icon, I do Not get the option, "MORE". I want to deselect one of my internal drives; I understood that this is the method. Is it possible that my software is defective? Just got in mail today.
    The first time I right clicked, I did see the option, MORE. I also saw one saying ACTIVATE. I clicked on that and the option, "MORE" disappeared without a trace -- even after reboots.
    Can you help?
    Thanks,
    cindystuart
    cindystuart@gmail.com

    Posted 2 years ago #

  3. c141heaven
    Member

    I installed this software about 12 hours ago.

    I had EXACTLY the same issue as you .... no 'more' (except activate) ...now even that is gone.

    Every time I'd put in a digit of my serial number, the 'creating recovery point' message box would grab the input focus away from the entry box...so I had to click on the serial number box about 20 times and enter one character at a time....) Finally I got all the digits in and it said 'activated'...now there is no 'more' option at all. And it is still doing it making my computer nearly impossible to use.

    This appears to beta software to me, and we are its testers

    Posted 2 years ago #

  4. Admin
    Key Master

    The "More" -> "Select drives to back up" menu item is available in the latest update of software.

    Right-click the small Rebit icon in the lower right corner of the screen and select "Check for Update" to apply the update.

    Alternately, versions of Rebit software prior to 3.0.258.5181 will need to be reset. Visit this page for steps to reset and reinstall the Rebit software.

    Posted 2 years ago #

RSS feed for this topic

Reply

You must log in to post.