Rebit Support Forum » Installation

Rebit Single-PC is Disconnected

(1 post)

  1. Admin
    Key Master

    Rebit Single-PC Repair

    IMPORTANT: These reset instructions will only work for Rebit Single-PC version x.x.258.x. If you have a different version do NOT proceed any further!

    1. Disconnect the Rebit device from your computer
    2. Uninstall any existing Rebit software (from the Control Panel) and allow the computer to restart
    3. Download this .BAT file:

    4. Right-click the .BAT file and select "Run as Administrator." This will open a Command Prompt where you have to press ENTER several times. Once Rebit Cleaner has finished, it will restart your computer
    5. Plug the Rebit device back into the computer
    6. Format the Rebit hard drive (all data will be deleted)

      7. 1. Open “My Computer” and identify the target hard drive letter (NOT the C: drive)
      2. Right-click the target hard disk drive icon and select “Format…”
      3. Ensure “NTFS” and “Quick Format” are selected
      4. Enter a “Volume label” of “Rebit”
      5. Click “Start”
      6. Click “OK” and “Close”

    7. Download the Rebit Single PC Software from this link:

    8. Double-click “RebitBuilder-3.0.258.8778.exe” if it does not automatically start
    9. Follow the instructions provided on-screen to update and install the Rebit software
    Posted 1 year ago #

RSS feed for this topic

Reply

You must log in to post.