Rebit Support Forum » Installation

Rebit Single-PC Reset Instructions

(1 post)

  1. Admin
    Key Master

    Rebit Single-PC Reset Instructions

    IMPORTANT: These reset instructions will only work for Rebit Single-PC version x.x.258.x. If you have a different version do NOT proceed any further!

    1. Disconnect the Rebit device from your computer
    2. Uninstall any existing Rebit software (from the Control Panel) and allow the computer to restart
    3. Turn off your Antivirus program (if you have this option)
    4. Plug the Rebit device back into the computer
    5. Format the Rebit hard drive (all data will be deleted)

      6. 1. Open “My Computer” and identify the target hard drive letter (NOT the C: drive)
      2. Right-click the target hard disk drive icon and select “Format…”
      3. Ensure “NTFS” and “Quick Format” are selected
      4. Enter a “Volume label” of “Rebit”
      5. Click “Start”
      6. Click “OK” and “Close”
      6) Download the Rebit Single PC Software from this link:
      http://c1226952.cdn.cloudfiles.rackspacecloud.com/RebitBuilder-3.0.258.8778.exe

    6. Double-click “RebitBuilder-3.0.258.8778.exe” if it does not automatically start
    7. Follow the instructions provided on-screen to update and install the Rebit software
    8. Once your Rebit software is activated, you can re-enable the Antivirus software
    Posted 3 months ago #

RSS feed for this topic

Topic Closed

This topic has been closed to new replies.